$16.00

Easily and securely tighten cable penetrators in tight quarters with this specially designed wrench! It’s made of hardened tool steel for a long life and has a 1/4″ socket adapter to be used with a socket wrench.

Clear
SKU: WL-BULKHEAD-WRENCH-VP
HS Code: 8204

Product Description

The cable penetrators have wrench flats that making tightening relatively easy, but when you pack a bunch of them together it gets more difficult. That’s particularly true with the 18-hole end-cap used on the BlueROV2. This specially designed wrench makes it easy to tighten penetrators in tight spaces.

The wrench is made of hardened chrome-plated steel and includes a lever bar designed to apply just the right amount of torque to tighten the penetrator. This tool is a great addition to your field toolbox!

Note: We recommend tightening the penetrators with your fingers and then use this wrench to tighten them an additional ~1/16 of a turn. When done, you should not be able to remove the penetrators by hand.

Product Description

The cable penetrators have wrench flats that making tightening relatively easy, but when you pack a bunch of them together it gets more difficult. That’s particularly true with the 18-hole end-cap used on the BlueROV2. This specially designed wrench makes it easy to tighten penetrators in tight spaces.

The wrench is made of hardened chrome-plated steel and includes a lever bar designed to apply just the right amount of torque to tighten the penetrator. This tool is a great addition to your field toolbox!

Note: We recommend tightening the penetrators with your fingers and then use this wrench to tighten them an additional ~1/16 of a turn. When done, you should not be able to remove the penetrators by hand.

  • 1 x Penetrator Wrench
  • 1 x Lever Bar

Specifications

ParameterM06M10
Part NumberWL-M06-BULKHEAD-WRENCHWL-M10-BULKHEAD-WRENCH
MaterialChrome-plated steel hardened to HRC 32-36
Drive Size1/4 in (6.3 mm)
Wrench Flats12 mm16 mm
Penetrator CompatibilityAll M06 size bulkheadsAll M10 size bulkheads

WLP Tool Information

Seal SizeBulkhead SizeBulkhead WrenchBulkhead/Nut Flat SizeBulkhead Installation TorquePlug WrenchPlug Hex SizePlug Installation Torque
4.5M06WL-M06-BULKHEAD-WRENCH12 mm1 N⋅mWLP-11MM-PLUG-WRENCH11 mm14 N⋅m
4.5M10WL-M10-BULKHEAD-WRENCH16 mm3.5 N⋅mWLP-11MM-PLUG-WRENCH11 mm14 N⋅m
5.5, 6.5, 7.5, 8.5M10WL-M10-BULKHEAD-WRENCH16 mm3.5 N⋅mWLP-14MM-PLUG-WRENCH14 mm14 N⋅m
9.5M14WL-M14-BULKHEAD-WRENCH20 mm3.5 N⋅mWLP-18MM-PLUG-WRENCH18 mm20 N⋅m
* The WetLink Penetrator Assembly Block is compatible with all WetLink Penetrator sizes

2D Drawings

WL-M06-BULKHEAD-WRENCH-R1 (.pdf)

WL-M10-BULKHEAD-WRENCH-R1 (.pdf)

3D Models

WL-M06-BULKHEAD-WRENCH-R1 (.zip)

WL-M10-BULKHEAD-WRENCH-R1 (.zip)

Revision History

3 September 2021

  • WL-M06-BULKHEAD-WRENCH-R1 – Initial Release

8 June 2021

  • WL-M10-BULKHEAD-WRENCH-R1 – Initial Release

Quick Start

  1. Tighten the penetrators to finger tight, then use the Bulkhead Wrench to tighten them an additional ~1/16 of a turn.
  2. If you can’t loosen them with your fingers, they are tight enough.

Community

Blue Robotics Forum – Watertight Enclosures