This cable penetrator is a simple solution to waterproofing your robot. It’s basically a bolt with a hole that the tether or other thick cable can be glued into to provide a waterproof, removable connection through watertight enclosures, boxes, panels, etc.
This particular penetrator has a extended length head and nut to make it easy to install and remove on an enclosure, even on densely packed end caps like the 4″ Series 14-Hole end cap. That’s perfect for a tether or other cables that you would like to install and remove frequently.
- Extended length head and nut for easy installation/removal
- Anodized aluminum construction for corrosion resistance and high strength
- Captive O-ring face seal that works on any smooth surface
- Wrench flats for easy tightening
- Multiple inner diameters to secure the cable jacket but leave room for potting compound
- Works for cables smaller than 8mm as well
- 1 x 8mm Cable Penetrator Bolt
- 1 x Cable Penetrator Nut
- 1 x O-Ring
|Recommended through-hole diameter||10 mm|
|Bolt Threading||M10 x 1.5|
|Bolt Length||0.98 in||25 mm|
|Bolt Head / Nut Diameter||0.71 in||18 mm|
|Wrench Flats||0.63 in||16 mm|