M10 Cable Penetrator for 6mm Cable

$4.00

This cable penetrator makes a waterproof, high-pressure seal to pass the thruster cable into a watertight enclosure. Each set includes a bolt, nut, and o-ring. Some assembly required.

In stock

SKU: PENETRATOR-M-BOLT-6MM-10-25-R2-RP
HS Code: 7616.10.7030

Product Description

This cable penetrator is a simple solution to waterproofing your robot. It’s basically a bolt with a hole that the thruster cable can be glued (potted) into to provide a waterproof connection through watertight enclosures, boxes, panels, etc.

We primarily recommend the WetLink Thixotropic Potting Compound, which can be applied in one step and provides a depth rating up to 1000 meters. Alternatively, we recommend Loctite Marine Epoxy and the Potting Kit to complete assembly.

Features

  • Anodized aluminum construction for corrosion resistance and high strength
  • Captive O-ring face seal that works on any smooth surface
  • Wrench flats for easy tightening
  • Multiple inner diameters to secure the cable jacket but leave room for potting compound
  • Works for cables smaller than 6mm as well

Contents

  • 1 x Cable Penetrator Bolt (for 6mm cable)
  • 1 x Cable Penetrator Nut
  • 1 x O-Ring

Specifications

ParameterValue
Recommended Through-Hole Diameter10 mm
Bolt ThreadingM10 x 1.5
Bolt Length25 mm 0.98 in
Bolt Head/Nut Diameter18 mm 0.71 in
Wrench Flats16 mm 5/8 in
O-ringNBR70 AS568-013

3D Models

PENETRATOR-M-BOLT-6MM-10-25-R2 (.zip)

PENETRATOR-M-NUT-10-8-R2 (.zip)

Revision History

24 August 2015

  • R2 – Initial release

Tutorials

Cable Penetrator Potting Instructions

WTE Assembly Instructions

Support Community

Blue Robotics Forums – Potting

Blue Robotics Forums – Watertight Enclosures