Switch

$14.00

This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handles up to 5A.

In stock

SKU: SWITCH-10-5A-R1-RP Category:
HS Code: 8534.00.00.40

Product Description

This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handling up to 5A of current and 120V, you can use it to directly operate low power circuits or interact with a microcontroller to provide input for the operation of your vehicle.

Like our cable penetrators this design has been tested to 1000m water depth.

Contents

  • 1 x Switch Bolt
  • 1 x Switch Dial
  • 1 x Switch Nut
  • 1 x Penetrator O-Ring
  • 1 x Switch Dial O-Rings
  • 1 x 30-3UL Button
  • 2 x Wire Leads

Specification Table

ParameterValue
Electrical
Operating VoltageUp to 120V AC
Operating CurrentUp to 5A
Wire Size22 AWG
To Turn ONClockwise / Red
To Turn OFFCounter-clockwise / Gray
Input Connector0.1" Male Header Pin
Output Connector TE Connectivity AMP Connector
Physical
Maximum Depth (Saltwater)1,000 m 3,280 ft
Maximum Pressure9,810 kPa1,430 psi
Recommended Thru Hole Size10 - 11 mm0.4 in
Maximum Wall Thickness13 mm0.5 in
Wrench Flats16 mm5/8 in
Bolt O - RingAS568-03, Buna-N
Plug O - Rings2mm Wide, 6mm ID, Buna-N

2D Drawings

Switch 2D Drawing

3D Models

SWITCH-10-5A-R1 (.zip)

Documents

30-3UL Datasheet (PDF)

Revision History

13 April 2018

  • Dial sticker is replaced with printed on arrows.

20 October 2016

  • R1 – Initial Release

Quick Start

  1. Assemble according to the installation instructions.
  2. Turn the dial all the way clockwise to turn the Switch ON.
  3. One full counter-clockwise turn will turn the Switch OFF.

Tutorials

Installation

Support

Blue Robotics Forums – Product Support