M200 Brushless Motor

$95.00

The M200 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T200 Thruster.

In stock

SKU: M200-MOTOR-R1-RP
HS Code: 8501.31.4000

Product Description

The M200 Brushless Motor is a simple motor version of the T200 Thruster. It uses the same internal components but doesn’t have the plastic nozzle or other components.

Applications

  • Waterproof brushless camera gimbals
  • Underwater actuators
  • Build your own thruster
  • Small ROVs that don’t need full size thrusters

Features

  • Efficient brushless electric motor
  • Standard mounting holes spaced 19mm and 16mm apart
  • Rugged design for use in extreme environments
  • Operates under extreme pressure and depth
  • High-performance plastic bearings that don’t corrode
  • Solder pads to connect and seal wires

Contents

  • 1 x M200 Brushless Motor

Specifications

ParameterValue
Physical
Mounting Hole ThreadsM3 x 0.5
Weight in Air174 g6.14 oz
Electrical
Operating Voltage6-20 Volts
Max Current22 amps
Max Power350 Watts
Performance
RPM/V (Kv Rating)490 RPM/V
Torque10.5 Nm4.5 in-lb

1 Torque is provided as the theoretical maximum based on the motor design. This torque can only be achieved at all speeds with the proper motor controller. These numbers have not been validated experimentally.

2D Drawings

M200 2D Drawing

3D Models

M200-MOTOR-R1(.zip)

Revision History

15 October 2015

  • R1 – Initial Release

Quick Start

  1. Solder cable to pads on the motor.
  2. Waterproof solder connection with epoxy or other potting compound.
  3. Connect the cable to an ESC, send a signal, and the motor will start spinning. That’s it!

Notes

It is strongly recommended to insulate the motor. Over time, without insulation, the wires will begin to show signs of corrosion.

Do not operate the motor for extended periods out of water, the bearings are lubricated by the water. Vibrations and noise will be greater when dry.

Tutorials

User Manual

Soldering wires to a M100/M200 Motor (YouTube)

M200 Disassembly

M200/M100 Troubleshooting Steps

Support

BlueRobotics Forums – Thrusters and Motors